Removable Bug & Mosquito Window Screen Mesh with Adhesive Tape, Fits Windows up to 59.1 x 51.2 inches

Easy to assemble and excellent value. I would highly recommend this product due to its value and function.

it could be user error, but the adhesive started to come loose after about a week of being applied. otherwise, it’s easy to use and does the job!

So messy. So hard to install. Sticker wouldn’t stick. Mesh hard to cut

If you just need a screen to stay put, this MIGHT work for you. However, I have a window that cranks outward, so I purchases this so I could get to the crank when needed. It falls apart, the corners constantly fall off. The magnets are not strong enough to hold the weight so as soon as you touch it the entire thing falls down. I ended up nailing the the top two corners and taping the bottom corners on. It will go in the trash as soon as I find a more permanent solution.

I like that it is easy to install and works really well no bugs have gotten threw the screen and i do highly recommend this item on saving on cost for a mesh screen.

When I purchased my house one set of windows did not come with screens. The rest were replaced and came with new screens or had a storm window system installed with screens available. After trying to find a screen for this one window I realized why they left it out - there is no pre-made screen that fits this type of old fashioned window. This window has two separate pains that each crank open outward. So it was either pay about $40 per window ($80 plus shipping) for a custom screen that would have the exact measurements and holds for these windows or go the cheap route. The cheap route found me here.Pros:-Cheap-Custom Size- I can lift the screen up to crank the window open and close when needed.Cons:- The magnetic strips do not stick to the border of window- Harder to assemble than it looksI measured my window before ordering. The measurements were exact to what I needed. I thought 'Great! Less customizing to do.' Not exactly true. The edges and magnetic strips come halved. Which means to get the full length and width available you need to connect two pieces to make one edge. This leads to a less stable frame that comes apart easily. It also eliminated my option of doing two screens, one per window even though that would technically be less screen there wasn't enough frame. I ended up just doing one big screen along the frame of the window to cover both windows at once which makes it difficult to get to the lock of the window that is in the direct center of the screen as it all falls down.The other issue I had was sticking that magnetic strips to the window frame. Despite cleaning the frame first the strips either weren't strong enough to hold the weight of the screen or just weren't sticking properly. Either way it lead to the screen not staying up on the window (window was still closed at this point so it definitely wasn't do to outside wind, etc.) I ended up stapling the magnetic strips to the frame. Not and ideal option for me but was doable since I own the house. Renters be aware this may be an unsolvable issue for you.The last problem I found was that it is nearly impossible to get the screen taunt. The plastic frame bends under pressure so pulling the edges to ensure the screen is tight before popping it into the frame only bends the frame. I'm sure there is a way to perfect the tightness-to-frame-strength ratio but I did not have the patience for that.Overall there are definite issues to deal with. This window is in a spare room that isn't used often and our weather gives us maybe three months to have windows open so to me custom screens weren't worth the price, at least in our current situation. After fully assembling and working out the kinks this screen will keep the bugs out and that is all I really need.

This was exactly what we were looking for. We have an older home with ild crank windows so we couldn't find screens to fit our windows. Rhis worked perfectly.

The item was poorly packaged (the long strips were outside of the item's box—one adhesive strip's paper had been stripped off in shipping by the tape of the box; another of the long strips, all three pieces, was missing altogether), but had everything I needed for the window I was putting it on. It was a bit fiddly to install the screen into the frame and sone of the plastic broke slightly while doing so. The instruction booklet was... vaguely helpful, but could easily have included more detail.Overall, it seems to me that a metal frame and more precise screen-stretching and installation process would improve this product. That said, this was also the least expensive version I could find and it does its job well.

Es un producto que se rompe muy fácilmente y se despega constantemente si está en exteriores

I have push-out windows and wanted to install a window screen so that I could leave my windows open in piece. This does exactly that.Now, this was my first time installing an insect window screen, so it certainly wasn't easy. Thankfully, it's quite self explanatory. The manual is easy to follow, but honestly it's best to play around with the parts and understand how they work. The hardest part was measuring, since the connectors do a poor job of keeping the plastic frames in place - this is my only critique so far. However, once you've measured it out, scissors will do the trick.The frame has stuck in place, however, the adhesives do pull out with the magnets sometimes when you pull out the screen to close your window. Not sure if this is because the adhesives weren't installed properly, but seeing as other customers have complained about this, I would recommend stronger adhesives. If this is fixed, along with stronger connectors, this product would be perfect. For the price, can't complain.

Justo lo que se muestra

Only did first frame and i made it bit wonky. Was worried it wouldnt stick on the window frame due to the heavy weight of the magnets. But wiped the window sill. Stuck it on...it's still on there. I have a window that opens outward with a handle. I made the mesh looser, so to accomodate the handle bulging out. No big deal. As long as it works. I recommend this product to professional $$$ frames. My unit is too high up and they can't guarantee the frames sit well.

Me gusto pero creí que la tela sería un poco mas gruesa