F-1011 6-Position 45A Power Pole Distribution Block Module, Connector Power Splitter Distributor Source Strip.

This DC distribution block is very well made. The enclosure is solid and each PowerPole (or equivalent, couldn't tell the difference if it was from another manufacturer) was installed perfectly with the contacts all the way nested to the end of each connector. Voltage input to connector 1 dropped 0.1V at connector 6 with a 12A load. Normally I would build a DC distribution block myself but the price was right and time was a factor. I don't think I will be DIY distribution blocks going forward.

EXCELENTE PRODUCTO… Entrega a tiempo, el producto recibido corresponde a lo ofertado, buen producto.

This is exactly as described. I probably have half a dozen of these in use works great good value. I have no complaints that I ever ran to 30 Amps and they seem to hold up well.

The ‘PowerPole’ plug has become a near standard in Amateur Radio and other 12vdc hobby applications where you are often/ constantly changing mobile radio equipment, setting up/ taking back down a radio setup in a State Park, or out in your backyard. This particular ‘PowerPole’ is a bus PowerPole that allows several radios and/or other accessories to easily also plug-in and share a common power supply battery. And, unlike just using stripped wires to connect to power… PowerPoles have the actual connector contacts up inside the PowerPole plastic housing, so no fear of a short circuit of a dropped battery or rig power wire using PowerPole connectors. Don’t know how I ‘survived’ before these came on the market! Yes a bit pricy… but worth it!

Using it with a 25AH battery to distribute power to amateur radio equipment. Decent quality.

Compact and well-built, but not as good as the Powerwerx PD series, which uses a thick copper bus bar (and not merely extra solder) to handle the current.That being said Powerwerx doesn't have a 6-PP option—just 4 and 8.

I used this to retrofit the output from my 50A power supply from two screw posts (not even binding posts) to PowerPole. It has an integrated fuse and over current protection, so I didn't require the one with fuses in it. I have another distribution block from Chunzehui that is fused and it has worked great so I went for the same brand here. I opened it up to check the build quality and it's all heavy gauge solid copper wire and well mounted.

I have many of these distribution blocks for 30A and 45A Anderson Power Poles, this brand is my favorite. It has more connectors for less cost and the quality is great. The polarity orientation is also uniform.