EZDIY-FAB PCIE 5.0 12VHPWR Sleeved Cable Kit, 16AWG Power Supply Cable Extension, PC PSU Sleeved Cable, 24PIN-ATX/(4+4) PIN-EPS/(12+4) PIN to 3X 8 PIN PCIE- RTX4080/4070Ti Extension Cable- Black

Makes my build look clean

Been building PC's for a while, typically use cablemods for extension, but they do tend to get pretty expensive. If you're looking for something to change the look or match a theme of your PC for a budget, this would be enough. Its a simple plug and play, does exactly what it says which extends your PC cables i.e. gpu, psu, etc. Quality seems to be decent, nothing to complain about. If I had a PC budget, I might think of grabbing another one of these.

The media could not be loaded. Only con is they are kind of stiff but you can work with them.I originally got these just for the 12vhpwr extension as my new case needs a long cable so these combind with my psu stock cables. Made it work pulls Gpu pulls 350w np. Eps and 24pin also look great

This review is for the EZDIY-FAB PCIE and ATX power cable extension with 12VHPWR kit in black and red variation. This is a revised review based on information and clarification from the manufacturer. Due to my mistake, I completely misunderstood the 4 + 4 pin connectors for PCIE. The 4 + 4 pin cables are not PCIE, they are EPS and typically used to provide supplemental power to CPU's. So please be aware of this distinction.I ordered this kit purely for looks. I've been trying to get a more cohesive look to my PC build with a red and black theme and thought this kit would add to that.The build quality of these sleeved cables are good. The molding of the connectors could be better but as long as it fits then it isn't an issue. The cables are thick and individually sleeved. To me, the sleeves and cables themselves felt very rigid. The red and black colored sleeves look good. I like how the 4 + 4 pin EPS cables have grooves on the connectors to join the 4 + 4 pieces together.This kit also comes with a set of wire combs or guides. There is also a 12 volt power cable for the RTX 4000 series. I don't personally have a RTX 4000 series card so I am not able to verify compatibility or functionality for that cable.In summary and with new information, I'm happy to recommend the EZDIY-FAB PCIE 5.0 12VHPWR Sleeved Cable Kit. They are built well, and I think they would work well with the correct hardware. The kit is a good value when you consider the price. The only real issue is the rigidity of the cables but that may not be an issue for everyone and therefore I did not reduce my rating.

This would be a great cable extension kit except that the color of the PCI-E 12VHPWR cable doesn't match the other cables. The difference is immediately noticeable as they are pretty different shades of white with the 12VHPWR being much brighter white. The wire gage is also different, but that doesn't bother me as much.Otherwise, the cables are very nice quality, the 24 Pin (Motherboard) and 8 Pin EPS (CPU) connectors are a thick gage that was easy to train and looks great. The included cable combs are surprisingly easy to get into place and slide easily enough to make training the cables very doable. The 12VHPWR cable comes with cable combs already attached which is a plus.If the colors matched (or were at least a bit closer together) for all the cables this would be a 5/5... as is it's a good quality set of extensions limited by the fact that it's a bit of a mess aesthetically.

This is a quality cable mod/extension kit.I recently built a new computer, I upgraded my power supply to a very nice Corsair RM750x. To buy the custom sleeved cables for this with the length that I needed was going to cost 75.00. With the way my NZXT case is laid out, getting the main board power connector and the aux CPU 4 pin connectors was very tight and doe not leave enough slack for me to feel comfortable with that little strain relief on those connectors.This kit allowed me to extend all the wires that I needed, now all the wires have the braided cover and not just the main board wires like the Corsair OEM wires *the RMx had black wires with no covering*, AND I have the excellent addition of the red striped wiring that goes perfectly with my case *NZXT h510 Elite: Black with red cable management bar*.No every part of my build is *custom*. Nice case, 12th gen I7, Aorus Elite board and just the right amount of ARGB to be turned on so I am not sitting in complete darkness when at my machine at night. The sleeved cables were that final touch to finish that solid custom feel. Additional bonus is the sleeved cables make my 3080RTX additional power cable look less like an after though as I was able to route it in a way that does not look like it was the only option like before.Excellent product at a very reasonable price.

Very nice set, helpful with upgrading my power supply - did have to do some assembly, but wasn't a big deal, just took some extra unexpected time.

doa