Wiper Blade Refill,4 PCs Adjustable Size of Universal Replacement Windshield Wiper Refill Replacement for Tesla,Toyota,Hyundai,Honda Front & Rear Windshield Wiper Baldes Rubber Strip(26")

Why did you pick this product vs others?:Honestly, just perfect. I replaced it on my Tesla model y and now it has been working well for over half a year. No water streaks and no squeaky noise. I’m buying more for my mom and will only be buying this because it works great and is great value. As long as you spend a little time taking the wiper apart

Installed fine on Hyundai palisade. Brought 28" and trimmed to fit. (don't throw away your steel guide strips you will need it because it doesn't come with clips) then to stop strip from sliding out I use the wiper frame and squeezed each ends to clamp down on the silicone. It's confirmed as silicone it feel just like silicone and absolutely not a rubber. This should last two year opposed to rubber only lasting almost a year. If this silicone blend is bad and has shorter life I will return to update the review. The black residue is the special water beading coating to be transferred to your windshield. (you won't be able to see any black residue on your windshield) I tested performance immediately after installing with water hose and it doesn't streak at all with oem steel multi joint wiper frame not one of those bullshit plastic frame with one leave spring inside which doesn't give as consist gradual pressure across length of wipers. Those plastic frame rely on downforce of headwind when driving.

This is the best way to go if you have wiper blades that accept inserts. Search YouTube for videos for you vehicle model and details on how to install. Usually super easy. Just make sure you get the correct profile for your vehicle. These cost a fraction of the full wiper blade replacements and generally work better, since you are keeping your factory blades, which of course fit your windshield better than any generic blade. In my experience, these only last about a year before they start chattering. But are so inexpensive you dont mind replacing them that often.

They may be a universal fit, though if you're using them on a Lexus/Toyota they might come off on fast wiping.The refilling is simple enough now what these refills lack is the proper channel for the metal insert to hook onto, so during the wiping if not set right into the blade they will come losing and you will see metal clanking all over the place. It took me about 30-60 minutes to get these properly fit and not fall out, compared to 5 min using an OEM refill. I never felt so frustrated on something that should be quick.I think it's better to spend the extra $3 at Toyota Parts and get the proper refill fit and save your frustration on getting these to stay in place. They refill wipes well, but not thick material compared to an OEM one as well.

I have three sets of Bosch wipers on european cars, and these inserts worked well on all of them.However, several points:1. Rubber gloves, from the time you open the package. The inserts are covered in some protective(?) goo and you won't want that on your hands.2. My three sets of wipers all had different end caps. Looks like the end cap design for the wiper manufacturers is a form of individual expression, and they can be hard to remove. For one of them, a bit of dremel work was required.3. Cannot attest to longevity since I only recently installed them, but the quality feels fine to the fingers for now.4. I ordered two weird-named brands of wiper inserts here on Amazon, they both were identical with the difference in name only.

These 6 mm (.24") wide inserts fit the OEM blades on my 2018 Subaru Crosstrek. This set of four 28" long inserts will actually do two complete replacements (26" front, 16" front and 12" rear). The inserts appear to be of very good quality, and I expect they will provide good service. Replacement is easy (but a bit fiddly), and the inserts have a messy graphite-like protective powder on them that gets on your hands (it washes right off), but installing new inserts will extend the life of your blades at a tiny fraction of the cost of replacing the blades themselves. Recommended!

I ordered the 4-pack silicon wiper refills and these are high quality silicon blades for a great price if you can get them to work on your vehicle. They are like wet noodles cut from a continuous roll and you must re-use the metal spines in your existing blades - no issue with that. You must also use gloves to handle these as they are covered in what looks like graphite dust. They are the exact width to fit my 2010 Highlander, and the other two Toyotas I have, but there is a problem with the height and they will not slide into the groves on the factory wiper arm properly. Also for these to work, the wiper arms must have end stops that contain the blade and prevent it from sliding out. None of my Toyotas have end stops on the factory wiper arms - the blades must have a molded slot or clip on one end to stop the blade from sliding out. These replacement blades do not have this, so return to sender....

The media could not be loaded. Very happy with this purchase. I couldn't find the correct PIAA silicone blade set for my Tesla Model Y, but this refill cost a fraction of the price (maybe 1/8th) and was easy enough to fit in the OEM arms with minimal cutting and modifying.After a few uses, the hydrophobic properties are starting to build up which is the primary reason I wanted to find silicone blades. These also seem softer than the OEM blades which would absolutely scream in freezing weather. These sound almost chalky and soft. They don't leave any streaks and help to build up that nice water repelling film.Only down side, the blades are FILTHY with what seems to be graphite? graphene? Not sure, but man did this get my hands dirty.For $80, the PIAA silicone option is still worth it to me but was unavailable for my vehicle. This is definitely the next best thing and at SO much less cost.