JENOLITE Rust Converter Spray | 400ml | RUST TREATMENT & RUST INHIBITOR | Fast Acting Epoxy Based Rust Converter For Metal | Converts Rust Into Stable, Ready-to-Paint Surface

After a bit of research into what product was best for my needs, I opted for Jenolite Rust Converter Spray. Stone chips had broken through the paint around the arch areas of my campervan, looking unsightly. A quick rub down on the affected area with 80 grit oxide paper back to clean metal, masking tape applied to avoid any overspray, then follow the instructions on the can - shake contents for a few mins, then apply from around 25cms, leave to dry circa 15 mins, then re-apply. It's clear initially, but as it gets to work it turns black, after 2 coats a thick protective layer is formed, after fully dry / cured the epoxy feels tough and has good coverage, I'm letting it fully harden over this week, and will look to apply a top coat of colour matched spray paint, and clear lacquer top coat to blend it in, and will then apply 2 coats of the Jenolite on top of the colour matched spray paint for added protective layer as it is clear. Good product, good performance straight out the tin with minimal prep, instructions are simple to follow.

This is a great product. I recently used it to treat the underbody of my 20 year old Ford Focus. It provided excellent coverage, and a good surface for paint to adhere to.However, as always with any type of paint/protector product, the preparation is every bit as important as the product itself. First, use a wire wheel and/or sandpaper to remove all the loose rust and dirt. Then use brake cleaner and a cloth to thoroughly clean and dry the area, and remove any grease. Only then should you apply the rust converter spray.Under these conditions, the spray adheres well to the surface, and forms an impenetrable epoxy barrier which stops rust developing further.Once this is dry, you can then paint it with the colour of your choice.

Easy to use, dried and recoated as instructed. Did the job as described, quickly, easily and stopped the rust

Excellent product, works really well on rusty gates and any other rusty surface. Good coverage, but remember to wear a face mask and gloves when using it.

This seems to work really well. I gave the area a wire brushing first and then sprayed the rust converter.Happy with the results and would definitely buy it again.

very easy to apply, so very pleased

Great product

Bought some of this to clear up unsightly surface rust on an old Range Rover P38 classic, works really well, seals in the rust and leave the surface looking treated and kinda new looking without looking like its just been undersealed. It show the natural ageing so doenst look to mask anything over. Also used on the bottom of a much newer Ranger Rover after seeing the results. Not that anyone really looks under the car that often but when its on the ramp for tyre changes or MOT all that surface rust just looks awful and will only lead to more later. So a quick dusting with this stuff on as many of the accessible parts you can get to leaves it looking alot better but also well treated so avoid the rust spreading. A light tickle after with some satin black spray has it looking like almost new. So much that last time I had the tyres done they guys had to check the age of the car as they said they couldn't believe how tidy it was!