for the xiaomi m365 pro where to apply that exactly ? between each magnet ? to seal motor casing with clear silicon is fine ? it escape from bearing ?

In general, the Statorade will naturally settle on the magnets once the motor spins for a short while. Sealing the casing with silicone should be fine, but I cannot speak to how well that motor is sealed. Please keep in mind that Statorade is not to be used with geared motors, as it will only serve to trap heat inside the motor. I was not able to find information online whether or not the Xiaomi M365 Pro is direct drive or geared, so use at your own discretion.

again fot the m365 pro do we need to replace or add more with time ferrofluid or we do that 1 time is for life ? is possible it go to short electronic

As long as it is a direct drive motor and the motor side plates are sealed, then about 4mL should be sufficient for a small hub like that and you only need to add it once for life. If you don't have a good side cover seal though, then it could leak out over time and require replacing.

Can i get the statorade out of the motor? i don’t know if my motor is an inrunner or outrunner😔

Yes, it's very easy to clean it out with an absorbent cloth or paper towel. But if you have the motor open to either add or remove Statorade from magnets, you can also see very clearly what style of motor you have too! The only ones where it will have a significant cooling effect our direct drive outrunner motors.

Will this work with a qs v3 5000w motor. here is the amazon link https://www.amazon.com/5000w-highest-torque-windings-motor/dp/b06y5nld1l/ref=sr_1_3?c

Yes it will, any direct drive hub. Add Hubsinks to get the full effect though. If the motor casing can’t shed the extra heat Statorade transfers from the core, it won’t do much good.

Desertcart Logo

Deliver to Paraguay

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

🔥 Cool your ride, power your journey 🚴‍♂️

SEAMLESS INTEGRATION - Designed specifically for direct drive hub motors, enhancing power and durability without compromising ride feel.
EXTEND MOTOR LONGEVITY - Keep your hub motor running cooler and longer by efficiently transferring heat away from the stator.
POWER UP WITHOUT OVERHEAT - Boost your motor’s continuous power by up to 40% while keeping it cool and efficient.
PRECISION INJECTION SYSTEM - Luer Lock syringe with a 2mm nozzle ensures clean, mess-free application every time.
MINIMAL FLUID MAXIMUM IMPACT - Just 5-8mL of Statorade doubles heat dissipation with zero noticeable drag—effortless performance upgrade.

Grin Technologies’ Statorade is a cutting-edge ferrofluid designed to dramatically improve heat dissipation in direct drive electric bike hub motors. By injecting just 5-8mL into the motor, it more than doubles heat flow from the stator to the motor shell, enabling up to 40% higher continuous power without added drag. The included Luer Lock syringe with a 2mm nozzle ensures precise, mess-free application, making it an essential upgrade for riders seeking enhanced motor efficiency, power, and longevity.

Reviews

J**H

Makes a big difference!

I used this along with heat sinks on my Graffiti X e-bike. No overheating. The motor runs much cooler. Strongly recommend.

26.08.2025

D**G

Really reduces temp and noise no added load

This stuff is amazing works better than expected the only issue I didn’t think of was resealing the hub motor but well worth it

21.06.2025

B**R

Helium3 for your direct drive motor!

This ferrojuice is the business! It’s absolutely essential for any hub motor. I noticed a significant temp drop during long rides and I can tell the motor is happy. Purchase a tube of clear silicon caulk to seal up circumference of motor casing on both sides to ensure this magic fluid doesnt leak out!

16.07.2024

L**S

Pushing my 1,500w to 5,500w with no issues now!

My scooter was limited to 13mph originally. I slapped a Flipsky VESC 75200 pro V2 on IT and I hit 40 before overheating. I added 6ml of Statorade between the stator’s and the magnet’s and now I’m going 63mph with no heat issues at all! This is a must for every hub motor and Grin Technologies makes a lot of other amazing products too.

13.05.2024

K**N

Great stuff but no tip included

The package was open on both ends and the tip must have fallen out. Wasn't in the mailed plastic bag either. Kind of a pain to apply without the tip but managable.

27.05.2022

#**O

Lowered hub temps

Diy ebike I built, 84v fully charged, running 45 amps so almost 3800w. On longer full throttle rides or up significant hills the rear hub would get pretty hot. Ordered this and no longer needed to worry about slowing down to let hub cool. Overall very satisfied with results. Hub still gets warm but not hot like before.

12.06.2024

W**S

Best ferrofluid for ebike motors

Used it on a 5000W and 3000W ebike rear hub motor. Works very well.

8.04.2025

K**R

What I needed

Works as expected it was easy to install watch video on grin technologies, it's a must to keep motor cool.

8.12.2023

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.