Calvana (2-Pack) Exact Replacement Part Number 08650-0022 Off-White Weir Gate Assembly - Sta-Rite U-3 Vinyl Liner Skimmer Hinged Weir Assembly - 8 1/2 Inches x 5 1/8 Inches Flapper Assembly

Ordered this product after researching several options for my broken Hayward SP1070-K skimmer door/flap. This was a PERFECT fit and very easy to install. The thing to remember is that when installing this new assembly is that the flat piece needs to slide into a vertical slot and push all the way down. Once in position, simply insert and tighten the screw and your all set. Perfect replacement!!

Like others have said, remove and flip the plastic base before you install it and it works great after that. Fits and works like the original weir door. Like others have pictured the top of the door is thinner than the original but works just fine.

Easy to install and perfect fit

As a previous reviewer commented: "...the flapper was molded in a die whose two parts were misaligned. This created flashing sticking out of the bottom of the flapper that would hang up on on the base plate and not allow it to flap freely." It is easy to fix by bowing the base plate to free the flapper from the base plate. trim that extra flashing (I forgot to take a picture before I trimmed it).Also, my flapper was facing the wrong direction. It will likely work in either direction, but I turned the flapper around when I reinstalled the base plate (after trimming the flashing) so that the INSTALLER ATTENTION lettering was facing the pool, not the skimmer basket. This is the ALL FLAT side of the flapper towards the pool, and the side with the "step" pointing towards the skimmer. I researched many pictures of other manufacturers, and I believe this to be correct (other Chinese versions have it "wrong" like this one, IMO).

Excellent product. Easy to install. Great Value

As others have posted, very little attention was paid to these plastic parts after manufacture. Lots of left over casting flash that interfered with free movement of the weir. You'll need to spend a little time with a razor knife and/or a flat file to clean up the edges. In my case the weir was also a little wider than the Hayward piece it was replacing so a bit of time on the grinder and more filing to clean that up and narrow it. After these modifications, it installed as original and functions as it should.

My pool is 14 years old and this part was the exact replacement part that was originally installed perfect fit excellent service

Easy to install and fits perfect. Works as designed.