IbywindScreen Protector For OnePlus 8T[2 Pack],9H Hardness Tempered Glass,With 1Pc Camera Lens Protector,1Pc Back Carbon Fiber Film(Not for OnePlus 8/OnePlus 8 Pro)

Wow. I was delighted to stumble across a video showing the application process of this TPU screen protector. So I came to Amazon to see if it was sold here and found it and ordered it.I received this SP several days ago but have put off installing it until today because I hate installing SPs and the lousy job I did installing the factory supplied SPs that came (uninstalled) on my OnePlus 8 Pro further discouraged me. I had so many bubbles I couldn't tell which ones had debris under them and which were just air bubbles. Over the course of 2 weeks, all the bubbles gradually disappeared except for 2 that had debris under them. And then one side on the curved edge didn't adhere very well either and was continually bugging me.For whatever reason, I decided today was the day to install this TPU SP and replace the lousy job I did on the OEM SPs. I figured if this new TPU SP didn't work out, I might just have to go without and hope that my OCD would allow an unprotected screen.Using the USB port for a home base for alignment is genius. I cranked up the shower on hot to minimize dust particles, followed the included instructions, and this SP went on perfectly, no bubbles, no misalignment, just perfect.I am delighted with this and can't recommend it enough. I'd give it 6 stars if I could. I only hope it holds up for a long time (but fortunately 2 came in the box).My 3.5 year old OnePlus 3 came with a factory applied SP and it remains on that phone to this day. Sure, it's scratched up some and isn't perfect, but it hasn't curled, no bubbles, and has protected the OP3 screen (encased in a Spigen Rugged Armor case) for over 3 years without issue. I call that value right there.For $10, you cannot go wrong with this TPU SP unless simply must have a TGSP. And from what I've read, those then to only adhere on the edges and leave a slight gap over the screen itself. I don't know if that's a universal issue or was just specific to the feedback I read on one TGSP. Regardless, this TPU SP and the application system it uses is the best I've seen.. especially if you have shaky hands and have trouble with alignments generally speaking.Search out the YT video on this and watch it. Seeing it being applied was helpful to me.

A great deal for a quality screen protector, easy to install with the guide that comes along with it. Seems thicker than most screen protectors. Covers the screen perfectly. Seems very scratch resistant so far. No bubbles whatsoever. Should last quite some time!

My favorite, go-to protectors due to its method of application. I've used on a Pixel 8 Pro and other phones. I did ruin the first one I tried with the first one I ever purchased, as there was a learning curve. Looks great, cleans great (I used eye glass wipes or cloths), and sticks well. Barely notice it is on and not the glass. Has good instructions, but if using the first time, you can find a video on it.

Summary: Great product, Bad/Missing instructionsI WROTE BETTER INSTRUCTIONS later in my comment.PROs: easier to install than most and better instructions than most, no bubbles if installed carefully (see my instructions), clever alignment tool, screen protector is smooth/slippery and doesn't feel rubbery, my Case (spigen ultra hybrid) didn't interfere/pop off the screen protector, fingerprint reader works well (once re-settup), smudges less than others I've used (hand oils), rear and camera protectors are a nice bonus.CONs: instructions aren't amazing (could be worse), Only 2 screen protectors :(, only 1 camera protector and it's plastic :(, only 1 back protector that doesn't go all the way to the edge and the carbon patern is a bit ugly :(.PROPER INSTRUCTIONS (so you don't get bubbles) :SCREEN:(1) Dust Is Your Enemy! Find a Clean and Bright space! (Examples: Kitchen counter/table, Bathroom Counter, Desk with lamp). Moving air stirs up dust so Turn off any fans in the room for a couple minutes and let the dust settle. Wipe down your work area (table) with a damp cloth (Just Water, cotton t-shirts work best)(2) Take of your case and Wipe down all sides of the phone with that damp cloth to get it clean, also wash your hands.(3) Insert the alignment tool (plastic positioner) into the charge port all the way, prongs on the screen side (you need to push pretty hard)(4) Set the phone down on the Rubber pad(5) Grab the accessories: Alcohol Wipe (no. 1) and Microfiber Cloth (no. 2), ignore the sticker(6) Wipe the screen with the Alcohol wipe Without unfolding it, and go over it a few times (save the wipe for the back and lens protectors).(7) Dry/Polish the screen with the microfiber cloth making sure to polish the whole screen until streaks go away(8) fold the cloth and wipe in straight lines from bottom to top away from the alignment tool to remove dust(9) check the screen is clean without touching the phone (look at the screen from the side of the phone/have your head at the edge of the table) If dusty repeat 8(10) Grab Screen protector, attach it to the alignment tool and set it on screen(11) Lightly pull on the tab at the top of the screen protector and use the Squeegee to Gently wipe from the bottom of the screen protector to the top to align the protector(12) Follow the instructions they sent starting with "Step 8"(13) Use the squeegee to gently push any bubbles towards edge of screen protector(14) Use the microfiber cloth to gently but firmly press down the edges of the screen protector always wiping from the middle of the screen to the edge.CAMERA Protector:(1) Find a clean working space (Screen Step 1)(2) Find and grab camera protector, it is on a small piece of black plastic, do not remove plastic protector(3) Wipe the Camera Lense glass with the Alcohol wipe you used for the screen(4) Dry/polish the camera glass with the microfiber(5) Grab the sticker from the accessories pack and stick it to the camera firmly then remove it.(6) Remove the lense protector from the black plastic piece. bend the black plastic using the 2 tabs until the lense protector partially releases, then lift it the rest of the way off by lifting by the clear film.(7) Holding the lense protector by the clear film, line up the protector with the lense and press firmly.(8) Remove the plastic film and you are done.BACK Protector:(1) Find a clean working space (Screen Step 1)(2) Find and grab Back protector, and discard the small piece (it is just left over from making the camera/flash hole)(3) set down the phone on the rubber mat, and Wipe the Back Glass with the Alcohol wipe you used for the screen and camera lense(4) Dry/polish the back glass with the microfiber(5) Check to make sure the back glass is dust free(6) Peel the paper back halfway (peel the top), line up the camera with the hole (make sure its straight and even) then stick down around the camera.(7) Peel the the rest of the paper backing and stick the lower half of the protector (if it is not straight carefully partially peel up and re-stick)(8) Use the squeegee to press down the back protector and to remove air bubbles (if ii has bubbles carefully peel up and press back down with squeegee)(9)Use the microfiber cloth to gently press down the edges of the protector always wiping from the middle to the edgeAdmire your work :)

Purchased multiple times for my phone. Very easy to install with the guide that comes with the product. Last a long time and had no issues.

The screen protector was my cleanest and easiest installs to date. Not as fingerprint proof as the one I used to use, but since it's out of production who cares. The camera protector is garbage, it wouldn't stick properly and I couldn't get the air bubbles out of it. That said I don't care for camera protectors, they usually mess up how the phones take pictures. Screen protector is solid and super clear, no issues with the fingerprind detector/readerUPDATE!!!! Compared to other screen protectors I have used, these pick up scratches a little too easily. My other screen protectors were fine until my kids would throw my phone but this is off of regular pocket usage just scratched up.