Lian LiLAN2-1X Premium PCI-E x16 3.0 Black Extender Riser Cable 200mm and Covert Bracket for LANCOOL 2 for PCIE 3.0 only (NOT Compatible with PCIE 4.0 VGA Cards)

I ordered this as I thought it might fit my Budget Montech Air X ARGB case build and sure enough it did, I added rubber legs to it for front stability as it sits up a bit and they only case mod I had to do was sip off a small section of metal between two of the cases slot covers. this was done so you could plug in the monitor cable to the graphics card, but it was a small easy mod I done with some tin snips. The mount is very nice good thick solid metal, that is well constructed and very sturdy!

If you have the Lian LI OL11 Dynamic XL or standard. This is the vertical GPU mount to get. One disappointment is that it doesn’t come in white but easy to dismantle and painted white. Looks great and very sturdy. No issues with the PCI express riser. Easy installation.

I didn't have the same case it was build for so I have to do some more DIY. The cabling with thick and sturdy, but flexible and long enough to comfortably install. I had too unscrew the PCI express plate to attach my GPU. The only is that I couldn't access the holes to remount. There is no way to screw back in the undercarriage(reverse). So I'm going to have to hunt down a drill bit and custom drill some holes for customization. Other than that it's a pretty sturdy. Only suggestion is extra screws. Maybe it's just me but those things are so small it's near impossible to finish a project without one or two running away.

2022-02-15 Morning Review:I just received the part last night and so far, I've been unable to mount an EVGA 3060Ti XC or an EVGA 3070 FTW3 Ultra into the PCIe slot. The reviews I've seen say it won't hold a 3080 or 3090 and mainly because those cards are 3 slot cards. The 3060 is only two slots along with the 3070 but the 3070 does extend a little past the second slot with the shroud. All that said I see no reason that any 3000 series cards shouldn't fit but I've been unable to slot a card into it as it seems the PCI slot doesn't line up with where my EVGA 3000 series cards do. It's like the metal mounting bracket on the video card is too thick or something. I plan on seeing if some simple tweaks can get it to fit, I just didn't have the time to look into last night.2022-02-15 Evening Update:Attempted to attach a 2070 Super to it and had the same problem the 3000 series cards did. I unscrewed the PCI board and connected it to the 2070 and carefully placed the card into the position where it would rest and then looking at the PCI board the screw mounts are approx. half a screw width off. Unfortunately, due to how it's made there's no DIY adjustments possible. I opted for a replacement, and we'll see how it goes.2022-02-17 Update:Card fit was a little tight in the bracket but was able to install an EVGA 3080Ti FTW3 Ultra in it. I'm using a Lian Li Mesh II case and had no problems installing the cage in the case. Not sure why they say you can't use a 3080/3090 as mine fits and still has around 3 inches clearance from the side glass that I would have no issue installing a 3 slot 3090 in it.

Becareful with this guys. Mine come with faulth Pcie. After I install all of my water cooler , I have to take everything out because of this pcie not working. Bracket is good anyway.

I love this thing, It was kinda lame how it didn't come with screws for the riser cable, but it fit perfect in my phantek case with no modifications. It's probably your best option for non RGB bullcrap vertical Risers. Would buy again, but probably don't need to because it'll last a few builds.

I'll start off by saying this product is working fine so far. I will edited if it stops working. I do like the look of having the GPU sideways. I originally bought this, because my water cooler hoses wouldn't let the GPU (Gigabyte RTX 2070) fit in a normal orientation. See below.My initial issue is that the product arrived as if someone had opened it, and put it right back in the box after letting it sit on a shelf for a while. The box wasn't sealed with tape (not a big deal), but I was surprised to see that the product didn't come wrapped in plastic like you'd expect from new products. It appeared to have a light layer of dust, and some very light scuffs. The addition hardware that came with it DID come in a bag, but it looks like the back was left in a bin with other hardware for a while as well. For the price, I would have expected it to be a bit cleaner. Wiry, I tested this bracket in another PC first, and it did work fine, proving full PCIE speed.Now for the issues of fitment: I understand this is probably a universal bracket between the Lian Li product line, but using the supplied support bracket, I could not fit it in. This was because with the support bracket attached, it was too thick, and stuck too far out horizontally fit in between the MB and slot into the rear PCIE IO slots. This is with their LanCool Mesh II case. Of course, not using it works. If you don't use it, be wiry if you use a heavier, longer card for sagging. In addition (this is due to my equipment, and suggestion for Lian Li), I had to rotate my water cooler to get the card to slot into this bracket. The bracket doesn't have screw holes to move the PCIE slot forward, so that dual slot cards can utilize the bottom two slots, moving it further away from the motherboard. Again, beware if you have a larger GPU. I was surprised to realize that they didn't make vertical PCIE slots, or a removal plate to be able to fit this assembly, similar to some of Fractal's cases.

Works as advertised. Mounting was not too hard and fit without needing any adjustments (cutting or modification to the case). Although mounting a GPU vertically may negatively impact GPU thermals, the sheer wow factor makes up for it with this worth the extra money.