4pcs Soft Close Cabinet Concealed Hinges European Half Overlay,110 Degree,Frameless,35mm Cup Door Hinge Nickel Plated

Very good hinges. I purchased the in-set model. Good quality, easy to install and the mechanism to liberate the doors without take off the base is the best I ever used. Advice: the 35mm hole must be 2,5 mm from edge to work perfectly.

The media could not be loaded. I was a little concerned when these arrived, as there wasn’t any directions for spacing, etc. so I built a quick test jig and it worked perfectly. The adjustability is very easy and spot on. No complaints and I can’t wait for my client to test everything out

I had some other brand and I bought a few at other hardware stores, but after testing them and measure them this one just fit perfectly, the are nice and they look the same, believe me I tried at least 4 of them and this will do the job. They look very sturdy and they are well made.

This is my 3rd or 4th time purchasing these hinges they work great. Highly recommend

The media could not be loaded. These worked perfectly to replace our old failing soft-close frameless cabinet hinges. Took a bit to figure out but was then easy & relatively quick to install. Will order extras to avoid having to find the ‘perfect’ replacement next time although I am hoping these hold up better than our last hinges (not this brand).Adjustments of up/down, left/right & forward/back worked great.

These seem to be decent quality. They are heavy enough and tight enough that they instill confidence. I'm a little stumped about to the design though. If you look at the picture there are little tabs on the bracket that attaches to the cabinet. This seems nice in that is should help ease installation and placement. However if you place the brackets at this depth, it leaves a pretty big gap between the door and the frame. I've adjusted it as much as I can, and the gap remains, see second pic. What am I missing?Edit: I resolved the issue for the most part. With the factory tabs, the gap between the door and the frame was over an 1/8 of an inch. But I discovered that if you take some pliers and bend those tabs so that they are flat, then you can just install the hinge with the newly flat tabs aligned to the front of the cabinet, nearly closing that 1/8" gap perfectly. One other reviewer recommended grinding them off. That would work too, but bending them is quicker and gives you a nice visual reference for how far back to mount them.

Nice soft close hinge if hinges are properly aligned the door closes very smooth. This hinge offers many adjustments for door in/out front/back and gap adjustment. Great value for the price.

Bought these for a cabinet project. Beware, they're not nearly as easy to install as the product page makes it seem. The instructions to have the back screws of the base plate 27 mm back from the front of the cabinet will have your door hitting the cabinet frame. Even pushing those base plates further forward with 3/4" thick doors has them hitting the edge of the cabinet. I'm probably going to try a different brand which means I'm out the money I spent on these.Edit:Revising my original rating down a star. I've been adjusting the doors on the cabinets that I built and these hinges have proven almost impossible to work with. You're supposed to be able to loosen a screw to move the hinge forward and back (to make it flush). That doesn't work anymore on them for some reason. I tried using a hinge lubricant, no joy. So I had to adjust the placement of the mounting plates themselves. If I had the time, I'd toss all of these and completely redo the doors with better quality hardware. Maybe at some point in the future. You get what you pay for...On the plus side, they do close very smoothly and the adjustments are pretty easy. But I feel like I should have just gone with Blum or another well established brand....