Table Top & Bar Top Epoxy Resin, Ultra Clear UV Resistant Finish, 1-Gallon Kit, Self Leveling, Perfect for DIY Epoxy Counter Tops, Tabletops & Bars (Table Top)

Let me start off by saying this is not my typical epoxy I use. But it was much more budget friendly than the more well known brands. It mixes very easily simple 1:1 ratio. I used this in one of my builds making three spalted beechwood shelves with a blue tinted epoxy river running down the center of each one. It looked stunning as can be seen from the pictures I listed with it. It’s easy clean up. I use a glass container and wipe out the container with lysol cleaning wipes which breaks down the epoxy easily. It has almost no oder at all. Shipping was very quick and it arrived safely. Foil seals under the caps prevent leakage diring shipping. It cured in a half a day or so depending on heat and humidity. Recommend pour is no thicker than 1:4” due to heat. But I was able to pour 1/2” without an issue in my air conditioned house. Easily popped bubbles on the surface with a plumbers torch. You could use a long lighter or even your breath. So if you want to save $$$ definitely give this a try. It worked just as good as the more expensive brands and is just as easy to use and identical in quality for sure.

If you want fine epoxy for your project you r in the right place. But please read this review carefully.First of all I'm not being paid nor have I received any free staff for this review.1. Carefully read label instructions. a) Temperature is number one in my list for good final outcome. 75 degrees is perfect for this epoxy and PLEASE take your time to make sure your room is warm enough and more important your epoxy. Use thermometer if you'd like to make sure. When little epoxy was used I warmed it in microwave and I think it worked the best.b) Thickness of layer MAX is 1/4 of an inch. Anything thicker than that will create wave and craters from rising bubbles.c) while it's drying don't use any chemicals near your project. I was coating my car with ceramic paint coating about 20 feet away out side of the house and some mist got into my house from outside. Epoxy was drying at that time. Mist of that chemical completely destroyed smooth surface of epoxy.

As a first-time user of epoxy, I was pleasantly surprised by this experience. First, it arrived much faster than I had expected. ETA was supposed to be sometime Monday or later, and it arrived the Friday before. The instructions for using it was clear and mixing it was very easy. In stirring, it did develop bubbles, but most of them were gone when I poured it on the table. Spreading it was easy with a little help from a plastic spatula, it leveled nicely. I tried to use a heat gun to work out the remaining air bubbles, but it was not required considering how warm it was inside the room I was working in. I actually think it may have made my experience more complicated than it should have been. When I stopped using heat, I fared much better. Overall, great product, fast service, and easier to use than expected.UPDATE:I have now completely finished the table that I was working on. I decided to add one more coat and I must say that the end result is even more impressive. The table tops are very smooth. I love how they shine when the light hits them. The edges took a little more effort, but overall I think it looks amazing. Considering this table is one that I got from my mom's house after she passed away in 2012 and it was nothing special. I just loved the table as it was. I feel that I've now taken her table and made it a true keepsake, which perhaps my kids will one day take to their own homes. There are no imperfections that matter in the final coat of epoxy. The ones that are there, were either put there by me or paint splatters from when my mom painted near the table.

After working with several types of epoxy resin, this has honestly got to be the best so far. The quality of the finished product is superb. Minimal bubbles, smooth surface, and a brilliant shine. Great value for such a great product !

Easy to use with great results. I made a wood countertop painted it black and I thought for sure I would see the wood gran after application but not the case at all epoxy fills in all scratch/ gran marks. Smooth as glass and looks like marble. You can buy marble effects spray paint on amazon as well.

I bought this to compare with ArtResin. This is now my preferred resin for many projects. Here’s why:Pros:Cures quickly and super clear (cures hard in 8 ish hours with nominal final cure time vs 24 hrs with art resin to harden, plus 30 days for final cure)Easy to work with for art projects (coating canvas, resin art, coasters, trays)1:1 mixingNo issues with bubbles, fish eyes or pittingMixes well with alcohol inks, micas and acrylic paintSelf-levelingCons:Short working time (20 min once i mix it)Not good for jewelry molds or casting as it requires thin poursScrew tops can be confused (you can put the Hardener top on the Base bottle) so I pour from bottle A and put it back on the storage shelf before opening bottle B. Every time.